Datto Networking: Access Points: Re-pair key



You are receiving the error X access point(s) on this network need to be re-paired, Click to re-pair (so we know it's you). within the Datto Networking Portal.


  • Datto Access Points


  • The access point firmware was recently reflashed.
  • The pinhole reset button was pressed.
  • The access point is unable to check-in to Datto.


Figure 1: The re-pair banner

The error banner, alongside the Re-pair now button, displays on all pages in the Datto Networking Portal if Datto detects that an access point requiring re-paring. In any case, click Re-pair to send the access point's key to the cloud, and initiate a re-pair between the cloud and the access point.

Review all firewall requirements for access points in the Datto Networking Firewall Requirements article to identify and resolve any communication issues between the cloud and the access point.

Was this article helpful?

0 out of 4 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage