Datto Switches: Link Aggregation

Follow

Topic

This article describes Link Aggregation and how to implement it on Datto Switches.

Environment

  • Datto Switches

Overview

Link Aggregation is the process of combining multiple physical links (ports in case of switches) to form one logical link, for purposes of increasing total available bandwidth, performance and reliability. Link aggregation is most commonly used to link bandwidth intensive devices to the backbone of a network or for connecting core switches with distribution switches, to extend the reach of a network.

Procedure

Navigation

1. Navigate to a device web session for your switch.

2. Click Port Settings as seen in Figure 2.

Figure 1: Port Settings

Grouping Ports

To create a Link Aggregate Group (LAG), follow these steps:

1. Select two or more ports, as seen in Figure 2.

Figure 2: Selecting Ports

2. Click Aggregate, as seen in Figure 3.

Figure 3: The Aggregate button

3. A prompt asking "are you sure you wish to aggregate these ports together" will display, as seen in Figure 4. Click OK.

Figure 4: Question prompt

The ports will then merge and display the ports within the LAG, and that they are now in a Group, as seen in Figure 5.

Figure 5: Ports 1 & 2 grouped

Splitting Ports

You can split one or more ports from an existing Link Aggregated Group. To do so, follow these steps:

1. Select a LAG, as seen in Figure 6.

Figure 6: Selecting a LAG containing ports 1 and 2.

2. Click Split, as seen in Figure 7.

Figure 7: The Split button

3. The Split Grouped Ports window will display, as seen in Figure 8. Select the ports you wish to remove from the group, then click OK.

Figure 8: Split Grouped Ports

Removing all ports from a group will remove group entirely.

Important Notes

  • PoE will automatically disable for all ports within the LAG.
  • The LAG will use the port settings of the lowest number port.
  • Rate limiting is not supported on aggregated ports.
  • Link Aggregation requires devices that support LACP.

Was this article helpful?

2 out of 2 found this helpful

You must sign in before voting on this article.

Calling all Partners! We want to hear your feedback! Please participate in this quick survey and help us build a better, more-relevant Knowledge Base!

Want to talk about it? Head on over to our Community Forum!