Datto Networking: How is Datto Networking Traffic Handled with Smart or Managed Switches Using VLANs?


Datto access points communicate with Datto Networking over their default untagged network connection. The port the access point is plugged into must be set up to handle this untagged traffic. Most managed switches can be set up to tag outgoing untagged traffic onto a specific VLAN, and untag incoming tagged traffic from a specific VLAN. The VLAN this traffic eventually ends up on must have a working DHCP server and a route out to the internet.

Look for PVID or "native VLAN" settings in your switch's configuration settings. Refer to your switch's manual and support documentation for full details on setting up ports and VLANs properly.

Was this article helpful?

1 out of 1 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Datto Homepage