Datto Network Manager: Accessing local wired LAN resources from a WiFi device



This article discusses how to configure the LAN so devices can access local wired resources over WiFi.


  • Datto Network Manager


You must bridge one of your SSIDs to the LAN so your wireless clients receive an IP address from the router:

1. In Datto Network Manager, click Access Points in the Navigation menu, then choose the appropriate SSID.

mceclip0.pngFigure 1: The Navigation window (click to enlarge)

2. Click Advanced at the top of the SSID Settings page, then enable Bridge to LAN. 

mceclip3.pngFigure 2: The SSID Settings page for SSID 1 (click to enlarge)

3. Click the Save Changes button in the top right-hand corner of the screen, then wait for the configuration change to take effect (approximately 5 minutes).

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Datto Homepage