Accessing local wired LAN resources from a WiFi device

Topic

This article discusses how to configure the LAN so devices can access local wired resources over WiFi.

Environment

  • Datto Network Manager

Answer

You must bridge one of your SSIDs to the LAN so your wireless clients receive an IP address from the router:

1. In Datto Network Manager, click Access Points in the Navigation menu, then choose the appropriate SSID.

mceclip0.pngFigure 1: The Navigation window

2. Click Advanced at the top of the SSID Settings page, then enable Bridge to LAN.

mceclip3.pngFigure 2: The SSID Settings page for SSID 1

3. Click the Save Changes button in the top right-hand corner of the screen, then wait for the configuration change to take effect (approximately 5 minutes).