AP40 Access Point hardware and specifications

Topic

This article provides the feature and hardware specifications for the Datto Networking AP40 access point.

Environment

  • Datto Networking AP40 Access Points

Description

Form factor

mceclip2.png
Figure 1: Top view of the AP40

Specifications

Wireless connectivity 802.11a/b/g/n/ac
2.4 GHz 2x2, 5 GHz 2x2
Bands 2.4 GHz + 5 GHz
Speed (rated) 1.2 Gbps
2.4 GHz - 300 Mbps
5 GHz - 867 Mbps
Range (approximate) 75' - 150' indoor (3-4 walls)
400' - 500' outdoor
Max users (recommended) 30 - 50 per AP
Cloud Management Built-in cloud management (no onsite controller/management appliance required), WPA/WPA2 Personal and Enterprise, captive portal/splash pages, user management capabilities, etc.
Automatic Firmware Upgrades Yes
Automatic Feature Upgrades (future-proofing) Yes
Zero config plug and play Yes
Self-forming, self-healing Mesh Yes
Seamless roaming Yes
Wireless LAN 4 SSIDs, bridge to LAN, bridge to VLAN (tagging), Public & Private SSIDs
Mounting Installation kit included: t-rail ceiling, solid ceiling or wall, Ethernet jack, outdoor wall/pole
Ethernet/LAN 2 x Gigabit
PoE Standard 802.3af/at,
Passive 18-24V (mode A, B, A+B)
*802.3at recommended
CPU Qualcomm QCA9557 + QCA9882
Memory 128 MB DRAM DDR3
LED Indicators Nine-color LED status indication
Hardware watchdog Yes
Antennas INTERNAL: 2 dual-band, 2 single-band
USB Yes
Idle power consumption 4W
Indoor/Outdoor Rating CE Marked for Indoor/Outdoor Use
Certifications EN 60950-1, EN 55032, EN 62311 (SAR & MPE), UL 60950-1, cUL 60950-1, EN 300.328, EN 301.489-1 and EN 301.489-17, EN 301.893, RCM , C-Tick 4268(2.4 GHz) +C-Tick 4268 (5 GHz), C-Tick 3548, ICES-003, IC RSS-247(2.4 GHz) + IC RSS-246(5 GHz), FCC Pat 15 B, C, E
Operating Temperature -20° to 50° C