Wall Mounting a Datto Networking Appliance
Scope
This article provides wall mounting instructions for the Datto Networking Appliance.
Parts List
You will need the following parts:
A - 2x wall mount brackets
B - 4x bracket screws
C - 4x wall anchors (not pictured, not included with the Datto Networking Appliance kit)
Installation
- Fasten the wall brackets (A) onto both sides of the Datto Networking Appliance (1) using the the bracket screws (B).
- Use wall anchors (C) to mount the Datto Networking Appliance to the desired surface.
- Install the WiFi antennas (D) and LTE antennas (E). Make sure that they do not collide with the wall.