Datto Networking Appliance (DNA): Wall Mounting a Datto Networking Appliance



This article provides wall mounting instructions for the Datto Networking Appliance. 

Parts List 

You will need the following parts:

A - 2x wall mount brackets
B - 4x bracket screws
C - 4x wall anchors (not pictured, not included with the Datto Networking Appliance kit)


  1. Fasten the wall brackets (A) onto both sides of the Datto Networking Appliance (1) using the the bracket screws (B).

  1. Use wall anchors (C) to mount the Datto Networking Appliance to the desired surface.

Do not use standard nails or screws to mount the Datto Networking Appliance, as they are not designed for mounting hardware, and may be more subject to failure.
  1. Install the Wi-Fi antennas (D) and LTE antennas (E). Make sure that they do not collide with the wall.

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage