SIRIS, ALTO, and NAS: Understanding remote logging



This article provides an overview of the Remote Logging feature, as well as setup instructions. 


  • Datto SIRIS
  • Datto ALTO


The Remote Logging option via CEF (Comment Event Format) gives you the capability to remotely log syslog events from the Datto appliance to your external logging server.

The Remote Logging feature requires access to port 514 over TCP to send log files.


You can enable and configure the Remote Logging feature in the Datto appliance GUI at Configure → Device Settings.

Once enabled, you will see the configuration prompt.

Figure 1: Remote Logging configuration.

Enter the IP address if your logging server in the Address field. Port 514 will automatically populate in the Port field, as Datto appliances send logs over TCP port 514. Click Apply to save the changes. Click Add Remote Server if you would like to add more than one logging server.

Once you enable remote logging, your server will begin to receive copies of your appliance's Linux system log (/var/log/syslog). 

Syslog messages usually include information about where, when, and why the log was sent, as well as any relevant IP addresses, timestamps, and the actual log message.

Additional Resources

Was this article helpful?

1 out of 2 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage