What are the PoE specifications for the AP40 & AP60?
Question
What are the Power over Ethernet (PoE) specifications for the AP40 & AP60?
Environment
- Datto AP40 Access Point
- Datto AP60 Access Point
Answer
- Ethernet 1: 802.3af/at (PoE/PoE+), or Passive 48-54V?0.5A
- Ethernet 2: non-PoE
Wattages:
- AF max draw is 12.95w
- AT max draw is 25.5w
- Passive will draw between 24 and 27w depending on the input voltage
PoE Misplug Tests:
- Plugging in passive 24V PoE into Ethernet 1 will not properly power up the device
- Plugging in passive 24V PoE or passive 48V PoE into Ethernet 2 will not burn out the unit
Datto access points function within the power requirements of the 802.3 specification. See the Additional Resources section of this article for more information.
Additional Resources
- Setting Up And Managing Access Points
- Datto Networking Switches Datasheet (PDF, requires Partner Portal login)
- Datto Networking WiFi Datasheet (PDF, requires Partner Portal login)