ALERT: Datto Drive Cloud service will no longer be available as of July 1, 2019. For more information, see our end-of-life article. If you'd like to migrate your data to Datto Workplace, see our migration guide.
To learn how to download your Datto Drive Cloud data, please visit this article.

Opening a Rackmount Chassis



This article explains how to open a rackmount chassis, such as a SIRIS Professional or SIRIS Enterprise. You might need to do this if you are replacing a hard drive or upgrading a hardware component.

Removing an Array Drive

Figure 1 - Drive Removal

To remove an array drive, press the release tab (1), and then use the arm (2) to pull the drive tray straight out.

Opening the Chassis

Figure 2 - Opening the chassis (top view)

If you need to open the chassis to upgrade or replace a component, push down on both release buttons and slide the cover off, as shown in Figure 2.

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.