Storm season is back, bringing with it the potential for significant weather events. If you have clients in areas prone to infrastructure disruption, visit the Disaster Recovery Resources guide for preparedness information. Datto recommends performing proactive disaster recovery testing to mitigate potential downtime. See our articles about the importance of disaster recovery testing and Preparing For A Cloud Virtualization Test: Policies, Procedures, And Partner Responsibilities to learn more. For live updates, follow @datto on Twitter.

DNA: Adding Wireless Networks

Follow

Topic

This article describes the process for adding a wireless network to your Datto Networking Appliance (DNA).

Environment

  • Datto Networking Appliance (DNA)

Procedure

1. To add a wireless network, log into the DNA web interface, and click Networks, as shown in Figure 1.

Figure 1: Networks

2. Once on the Networks page, scroll down to the Create section, and click New WiFi Network.


Figure 2: New Wifi Network

3. Enter all relevant information. When finished, click Save Changes.

If you do not want the network's SSID to be broadcast, you must uncheck the Advertise this SSID check box.

Figure 3: WiFi configuration card

4. The appliance will display the new WiFi network in the sidebar of the Networks page.


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Calling all Partners! We want to hear your feedback! Please participate in this quick survey and help us build a better, more-relevant Knowledge Base!

Want to talk about it? Head on over to our Community Forum!