Datto Networking Appliance (DNA): Creating or Adding Wireless (WiFi) Networks



This article describes the process for adding a wireless network to your Datto Networking Appliance (DNA).


  • Datto Networking Appliance (DNA)



1. To add a wireless network, log into the DNA web interface, and click Networks, as shown in Figure 1.

mceclip0.pngFigure 1: Networks (click to enlarge)

2. Once on the Networks page, scroll down to the Create section, and click New WiFi Network.

Figure 2: New Wifi Network (click to enlarge)

3. Enter all relevant information. When finished, click Save Changes.

If you do not want the network's SSID to be broadcast, you must uncheck the Advertise this SSID check box.

Figure 3: WiFi configuration card (click to enlarge)

4. The appliance will display the new WiFi network in the sidebar of the Networks page.

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Datto Homepage