ALERT: Datto Drive Cloud service is no longer available. For more information, see our end-of-life article. If you'd like to migrate your data to Datto Workplace, see our migration guide.

Datto Networking Appliance (DNA): Port Aggregation



This article describes the Port Aggregation feature of the Datto Networking Appliance (DNA).


  • Datto Networking Appliance


The Port Aggregation feature allows an operator to combine two or more NICs to act as a single logical link (LACP interface). Aggregation enables improved connection performance, as well as redundancy for inter-network traffic passing through the DNA.

To access the Port Aggregation card, log into the DNA web interface, and click System, as shown in Figure 1.

Figure 1: System

From the System page, click the New Port Aggregation link. You will see the New Port Aggregation card shown in Figure 2.

Figure 2: New Port Aggregation

To add an LACP interface, enter a name for the configuration in the Description box. Then, select two or more ports to combine into a single link. Click Save Changes to save the configuration.

If you are using this feature on an appliance connected to a switch, and you make any changes to the LACP configuration on the DNA, you will need to make corresponding changes to the switch as well.

Monitoring Port Status

You can monitor the status of your LACP interface from the Port Overview card on the DNA's Status page, shown in Figure 3.

Figure 3: Port Overview

Technical Notes

  • The DNA's port aggregation feature conforms to the IEEE 802.3ad standard (LACP) and is compatible with OpenMesh / Datto Managed Networking switches.
  • An Ethernet port cannot be a member of an LACP interface and used as a standalone port at the same time.
  • The LACP interface can include 2-4 ports; you can create as many LACP interfaces as you have LAN ports available.
  • LACP interfaces are compatible with the same features as a normal standalone LAN port, such as native LANs and tagged VLANs. 

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.