Datto Networking Appliance (DNA): LTE



This article describes the LTE card of the Datto Networking Appliance's (DNA) GUI. 


  • Datto Networking Appliance (DNA)


The LTE card allows device operators to apply existing custom DNS settings to the LTE failover interface.

To access the LTE card, log into the DNA web interface, and click Networks, as shown in Figure 1.

mceclip0.pngFigure 1: Networks (click to enlarge)

Click the LTE link shown in the left-hand column of the page. You will see the card depicted in Figure 2.

Figure 2: LTE (click to enlarge)

By default, the regional cellular carrier provides the DNA its LTE DNS settings. To override these settings, follow the steps below:

1. Click Add Custom DNS. The fields shown in Figure 3 will populate.

2. From the Nameservers dropdown, select Google Public DNSOpenDNS, or Custom. If you choose Custom, the LTE card will prompt you to enter a Primary nameserver and a Secondary nameserver.

To remove custom DNS settings from the LTE interface and revert to the carrier's settings, click Remove.

3. Once you've finished making changes, click Save Changes.

4. After customizing these settings, Datto recommends performing an LTE failover test to verify that your new settings work as desired.

customDNS.pngFigure 3: Custom DNS (click to enlarge)

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage