How do I connect a client device to the Ethernet ports on an access point?
- Datto Access Points
The Ethernet ports on the access points can operate either network uplink ports, used to talk to the local network and internet, or as wired client access ports used to pass a wired client's traffic onto the local network.
The access point will listen for DHCP traffic on each Ethernet port. If it hears an active DHCP server responding to lease requests, then the port is set as a network uplink port. If it hears DHCP lease requests, but no DHCP server responses, then the port is set for wired client access. This is an automatic process, and cannot be manually configured.
When the port is set for wired client access, it will treat the client as if it was connected to one of the configured SSIDs.
To configure an SSID to bridge the connection down to a wired client:
1. Navigate to a device web session for your access point.
2. Click Advanced, and scroll down to Miscellaneous.
Figure 1: Bridging wired clients
3. Click the drop-down and choose the desired SSID to bridge the connection to.