Datto Networking: What are the PoE specifications for the AP62?

Follow

Question 

What are the Power over Ethernet (PoE) specifications for the Datto Networking AP62 Access Point?

Environment

  • Datto Networking AP62 Access Point

Answer

  • Ethernet 1: 802.3af/at (PoE/PoE+)
  • Ethernet 2: Passive 18-24V⎓1.34-1A (Mode A, B, A+B)

Wattages:

  • Max draw is 18.2W.
  • Typical peak draw under normal operation is 14W.

PoE Misplug Tests:

 PoE (passive) switch voltage on passive/active POE port
PoE Port 24V 48V
24V OK OK
48V OK OK
Datto access points function within the power requirements of the 802.3 specification. Datto recommends 802.3at. See the Additional Resources section of this article for more information.

Additional Resources


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage