Datto Networking: Switches: Jumbo Frames



This article describes how to enable and configure jumbo frames on a Datto Switch.


  • Datto Switches


Ethernet frames, as specified by the IEEE 802.3 standard, transmit a Maximum Transmission Unit (MTU) of 1500 bytes. Jumbo Frames support an MTU of up to 9216 bytes.

Ensure all devices connected to the switch can process the Ethernet MTU size set on your switch.


1. Navigate to a device web session for your switch.

2. Click Switch Settings.

Figure 1: Switch Settings

3. Click the Jumbo Frames dropdown to reveal settings, and click the Enable checkbox to interact with them.

Figure 2: Enabling the setting

4. Set an Ethernet MTU Size. This can be up to 9216 MTUs.

Figure 3: Ethernet MTU Size

5. Click Save Switch Settings.

Was this article helpful?

0 out of 1 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage