Datto Network Manager : Switch port settings



This article gives an overview of Datto Network Manager's Switches page.


  • Datto Network Manager


Datto Network Manager's Switches page lets you add, configure and manage switches on your Datto network.


Navigating to the Switches page

From the Navigation menu, expand the Manage tab, then click Switches.

mceclip0.pngFigure 1: The Navigation menu (click to enlarge)

Using the Switches page

mceclip1.pngFigure 2: The Switches page (click to enlarge)

Below these options, Network Manager will show a list of all switches on the network, along with the following at-a-glance information:

  • Device name and MAC address (click the switch name for in-depth status statistics)
  • Switch description
  • Model
  • IP address
  • Last check-in
  • Uptime
  • Ports (active / total)
  • Power (available / total)
  • Connectivity to the Cloud server for each device (represented as a horizontal bar graph covering the last three hours)
  • A column for further actions for each device

Additional actions on the Switches page

To access additional management options for each switch, click the ellipsis icon in the rightmost column. Additional options are:

  • Apply Template
  • Create Template
  • Reboot
  • Move to Network
  • Replace Switch
  • Delete Device

mceclip2.pngFigure 3: Additional actions on the Switches page (click to enlarge)

Advanced switch status information

Click a switch's device name for expanded status information. The following new options will also appear under Switches in the Navigation menu:

  • Switch Settings
  • Port Settings
  • Tools

mceclip0.pngFigure 4: The Switch Status page (click to enlarge)

Using the Switch Settings page

On this page, you can configure the following switch options:

  • Spanning Tree Protocol (STP)
  • LLDP
  • Voice VLAN
  • Quality of Service (QoS)
  • Access Control Lists (ACLs)
  • IGMP Snooping
  • Jumbo Frames
  • SNMP
  • Monitor Only

Read Getting started with Datto Switches to learn more about switch settings.


Figure 5: The Switch Settings page (click to enlarge)

Using the Port Settings page

The Port Settings page shows all active ports on the switch and lets you configure them individually. Read Datto Networking: Switch port settings to learn more about port settings.

mceclip7.pngFigure 6: The Port Settings page (click to enlarge)

Using the Troubleshooting Tools page

The Troubleshooting Tools page lets you reboot the switch and test individual ports with the following tools:

  • Cable Diagnostics
  • LLDP Neighbors
  • Ping
  • Traceroute
  • Connected Devices

Choose your tool from the Tools drop-down menu, choose the port from the Ports drop-down menu, then click the Run Test on Port button.

mceclip9.pngFigure 7: The Troubleshooting Tools page (click to enlarge)

Additional Resources

Was this article helpful?

0 out of 1 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage