This topic describes how to configure IGMP snooping on Datto Switches.
- Datto Switches
IGMP Snooping is used for controlling multicast traffic by listening to IGMP messages being processed by the switch, and preventing these messages from being sent to hosts not part of the respective multicast.
1. Navigate to a device web session for your switch.
2. Click on Switch Settings, as seen in Figure 1.
Figure 1: Switch Settings
3. Click on the IGMP Snooping dropdown to reveal settings, and click the Enable checkbox to interact with them, as seen in Figure 2.
4. Click Save Switch Settings when you have finished modifying settings.
The following IGMP Snooping settings are available:
The available IGMP Snooping versions are v2 and v3. You can select either or in the Version drop down.
You can enable IGMP Snooping for any VLAN by selecting the corresponding checkbox next to the VLAN ID as seen in Figure 3. You can manage your switch's VLANS in the Port Settings page.