We have identified an issue with the 2.0.9 version of the Datto Windows Agent. An auto-upgrade hotfix is available. Further information is available at the Datto Service Status page.

Datto Networking: Switches: Mounting Hardware



This article describes how to mount Datto switches using the included mounting hardware.


  • Datto Switches


All Datto switches include the same mounting hardware. This article uses the E24 model as an example for all diagrams.

There are three sets of mounting hardware included in the switches' packaging:

Rack mount

Attach the included mounting brackets to the switch as shown in Figure 1, then secure the mounting brackets to the rack. The switch can be mounted in an EIA standard size (19") rack.

Figure 1: Rack mount (click to enlarge)

Desk or shelf mount

Apply the included rubber feet to the bottom corners of the switch as shown in Figure 2, and place on a flat, level surface.

Figure 2: Desk of shelf mount (click to enlarge)

Wall mount

Attach the included mounting brackets to the switch as shown in Figure 3, then mount to a wall with the ports either facing up or to the side. Ensure the wall anchors (not included) can support the weight of the switch and any cabling.

Figure 3: Wall mount (click to enlarge)

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage