This article describes how to add Datto Access Points into a network using the Datto Networking Portal.
- Datto Access Points
Adding Datto Access Points to a network will allow you to manage and monitor your devices from anywhere by using the Datto Networking Portal.
1. Navigate to a device web session for your access point.
2. Click the Manage drop-down, then click Access Points.
There are three options for adding access points to your network. Click the Add New button to add a access point using the map view, or click the arrow next to the button to access the following options:
Add access point on map
This process will display the Map view of the Access Points page, along with a prompt for adding your access point. The map will center on your network's configured location. Use the + and - buttons to zoom in and out, and click any place on the map to change the access point's latitude and longitude.
Fill in the following information to add a access point:
- Name: Enter a name for an access point.
- MAC address: Enter the MAC address of an access point.
- Description: Enter a brief description of the access point. You can add information such as its location in an office, or anything unique to the device.
- Latitude: The latitude is automatically calculated based on your network's location, or where you clicked on the map. You can also manually enter the latitude.
- Longitude: The longitude is automatically calculated based on your network's location, or where you clicked on the map. You can also manually enter the longitude.
Click Add and repeat the process for each additional access point.
Bulk add access points via MAC
You can add multiple access points at once by clicking Bulk add access points via MAC, and entering their MAC addresses in the MAC addresses field. Enter a new line to separate each MAC address. Click Create to add your access points.
Bulk add access points via CSV upload
You can also bulk add access points using a CSV file by clicking Bulk add access points via CSV. Click Download sample to view a preformatted file, and enter values for your access points' MAC addresses, location, etc. Select Choose File to browse for your CSV file, and click Create to upload it.