Legacy Open Mesh: G200 Router Firmware Release Notes



This article contains release notes for G200 router firmware.


  • Datto G200 Routers


Known Issue - April 10, 2019

1.1.0 - January 23, 2019

Bug Fixes

  • Resolved an issue where a router operating on LTE failover could not resolve hosts if it used an unreachable DNS server
  • Resolved an issue that prevented operators from saving static DNS server settings for router WAN interfaces
  • Resolved an issue that prevented PPPoE WAN traffic tagged with a VLAN ID from offloading
  • Resolved an issue that prolonged boot times for a router configured with one or more IPsec tunnels
  • Resolved an issue where advanced DHCP options 42 (NTP server) and 66 (TFTP) malfunctioned unless if an operator enabled option 33 (static route)

 1.0.9 - December 6, 2018


  • LTE functionality update for the D200 router to the shared G200/D200 firmware line.

1.0.8 - November 16, 2018


  • Resolved an issue which caused devices to display an LED indicating that traffic wasn't being passed in scenarios where traffic was actually being passed.
  • Resolved an issue that prevented passing client traffic through IPSec VPN tunnels.

Known Issue

  • Setting a DNS server under Global Router Settings result in DNS queries being refused.

1.0.7 - November 2, 2018


  • Initial LTE modem support (D200 Only)
  • Initial TitanHQ Web Filtering support (D200 Only)
  • Hub and Spoke Site-to-Site VPN support (Interface coming soon...)


  • Security fixes

Known Issue

  • Setting a DNS server under Global Router Settings result in DNS queries being refused.

1.0.6  - August 16, 2018


*User interface coming soon.

**It has been found that PPPoE is not functional at this time when configured solely via the local WAN configuration wizard. A CloudTrax user interface will be added to ensure this functions correctly.


  • NAT hairpinning will function correctly even when the client is not on the same LAN as the server.

1.0.5  - June 5, 2018


  • Use ntp.cloudtrax.com for network time.
  • Additional DHCP options to enable/disable DHCP Server, and use Option 42,33 & 66.


  • DHCP DNS servers appended to DNS server list, instead of replacing them.
  • Changed OpenVPN configuration to use lz4 compression instead of lzo. Please see:
  • DHCP pool range would always start at beginning of subnet, regardless of CloudTrax setting.
  • Static IP address wizard no longer worked after firmware upgrade.

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Head on over to our Community Forum!