Legacy Open Mesh: CloudTrax release notes

Follow

Topic

This page contains all release notes for the CloudTrax Portal.

Environment

  • CloudTrax Portal

Description

Datto may release updates to CloudTrax that will affect the portal's functionality, or impact certain devices. For firmware release notes for specific devices, see the release notes in their respective sections.

Index

Releases

Release 2019-06-05

Bug Fixes

  • Resolved an issue related to exporting information from the All Networks page. 

Release 2019-06-05

  • A required firmware update for Datto Access Points and Legacy Open Mesh Access Points is now available. Datto customers, click here to learn more. Legacy Open Mesh customers, see this article.

Bug Fixes

  • Resolved an issue where some APs would show an incorrect Last Checkin time 

Release 2019-05-22

Bug Fixes

  • Resolved an issue where, rarely, APs would show offline and need pairing when operating normally

Hotfix -2019 05-02

Bug Fixes

  • Resolved an issue where changes to Portal client user permissions did not reflect in the Device Web Page

Hotfix - 2019-04-10

Bug Fixes

  • Temporarily removed the Custom Site-to-Site VPN tab from the D200 and G200 UI pending resolution of a known issue which prevents device operators from using the feature

Known Issue

Release 2019-04-08

Bug Fixes

  • Resolved an issue where APs would not get their list of neighbors to facilitate 802.11k functionality

Release 2019-04-02

Improvements

Bug Fixes

  • Resolved an issue where users were unable to transfer individual switches between networks
  • Resolved an issue where Managed Power devices wouldn't respect the maintenance window

Hotfix 2019-03-08

  • Resolved an issue preventing some users from logging in after changing user role settings

Release 2019-03-04

Bug Fixes

  • Resolved an issue where some switch models were not usable as templates in the Create Template page

Release 2019-02-25

Improvements

  • D200 Custom Traffic Policies can now be re-ordered in the UI
  • D200 combined LAN + VLAN capacity has been changed to 5 per device
  • The D200 now displays LTE bandwidth use on the Router Status page when in failover mode

Hotfix - 2019-01-28

Bug Fixes

  • Resolved an issue where the Datto Networking Portal did not display the configured VLAN ID for a WAN PPPoE configuration after an operator saved the setting

Release 2018-12-20

Improvements

  • This improvement enhances the device's routing tables by whitelisting check-in server traffic, which allows uninterrupted device management while in failover mode. For more information, see our article about LTE failover on the D200
  • To resolve an issue that prevented the DNS servers entered for the 2nd and 3rd D200 static WAN configurations, the D200 now only supports entering a DNS server for the 1st static WAN configuration. This improvement removes the DNS server fields for the 2nd and 3rd configurations
  • Improved reporting accuracy and readability of outage graphs for Datto access points
  • D200 Custom Traffic Policies now process in order of entry in the UI

Bug Fixes

  • Resolved an issue that prevented adding new D200 LAN configurations after deleting all previously configured ones

Release 2018-12-03

Bug Fixes

  • Temporarily removed the VLAN ID field used for PPPoE configuration to resolve an issue which could cause the feature to stop working

Known Issues

  • The VLAN ID field used for PPPoE configuration is unavailable
  • The DNS server configured in Global Router Settings will not perform lookup requests. As a workaround, configure DNS servers per WAN interface

Release 2018-11-19

New Features

  • PPPoE: Operators can now enable and configure PPPoE on D200 devices. For more information, read the Routers: WAN Settings article

Improvements

  • To address a D200 device firmware issue, disabled the Custom Site to Site VPN Settings tab for D200 devices running firmware versions below 1.0.8

Release 2018-11-12

Improvements

  • Streamlined alerting settings to only show options related to hardware configured on a network
  • Improved reporting accuracy and readability of user traffic and outage graphs for Datto switches

Bug Fixes

  • Resolved an issue where access point SSID configuration changes failed to save when using Internet Explorer
  • Resolved an issue where access point tri-band radio settings failed to display in Europe

Release 2018-10-24

New Features

  • All Client View: The Datto Networking Portal now has an additional view for connected clients.For more information, read the Datto Networking: Clients article

Improvements

  • Added functionality that allows operators to enter an SSID for the second 5GHz radio on the AP62
  • Added functionality that allows operators to define the bridge priority for switches using Spanning Tree Protocols

4.33 Release - 2018-08-16

Improvements

  • Added initial Site-to-site VPN interface for routers*
  • Improved QoS interface for routers*
  • Added custom firewall traffic policies for routers*
  • Added advanced DHCP options for routers*
  • Additional client data reporting for routers*
  • Routers will automatically get a dynamic DNS entry assigned from the domain device-dns-dev.com; this is visible on the router's status page

*Requires 1.0.6 router firmware release

Bug Fixes

  • FIX: Restrict router and switch names to accept only valid characters

Notes

  • The Band Steering beta test has completed. The feature did not meet performance and stability expectations and was removed. Internal testing and development on the feature will continue for future consideration

Hotfix - July 25, 2018-07-25

New Features

  • Datto Switch Pages: The user experience for configuring Datto Switches has been completely overhauled. For more information, see the Datto Switches: Getting Started article

4.32 Release - 2018-06-12

Improvements

  • Operators can set the Client Force Timeout as low as 1 minute
  • Router now has additional DHCP options, including the ability to disable DHCP
  • Routers now have a check-in history bar
  • Operators can edit a device's MAC address from the side pane
  • Improved access point initial check-in
  • Consolidated new user verification and password setup emails to one message
  • Operators can disable LEDs on a per-AP basis
  • Bulk added access points will use the network's location
  • Account administrators can use the Export All Nodes function

Bug Fixes

  • Resolved an issue where Datto HTML embeds did not display the AP42/AP62 properly
  • Resolved an issue where splash pages were functional when the Disable DNS setting was toggled on
  • Resolved an issue that prevented sorting access points by their default gateway
  • Resolved an issue that hid the application reporting toggle
  • Resolved an issue where operators could not enter non-alphanumeric characters into the system name
  • "Login Name" changed to "Certificate Name" for VPN Users table, which better defines the usage of that field

4.31 Release - 2018-05-25

Improvements

  • The clone network list is now sorted alphabetically
  • Updated the service agreement to comply with GDPR

Bug Fixes

  • Resolved an issue where the access point icon disappeared when moving an access point between networks
  • Improved formatting of some router audit log text

4.30 Release - 2018-04-30

Improvements

  • Added Auto Channel support for devices with two 5Ghz radios
  • Access point channels 12/13 can be used in countries where it is supported
  • Router Firmware "Upgrade Now" button added
  • Users can now create a VLAN/LAN on the router with DHCP turned off
  • Users can now create Port Forward ranges instead of entering each port manually

Bug Fixes

  • Channel 12/13 can now be used in countries where it is supported 

4.29 Release - 2018-04-12

Improvements

  • Network Editors can use the Move to Network option on the actions menu
  • Unsupported transmit power, channels and channel widths are now hidden based on country setting
  • All voucher edits are logged in the audit log
  • Removed the Require Voucher button from the HTTP Authentication page due to non-applicable use
  • Operators can no longer set an unverified admin as an account owner

Bug Fixes

  • Require Voucher button removed from HTTP Authentication page since it was not applicable
  • Voucher edits are now logged in the audit log
  • You can no longer set an unverified admin as an account owner

Hotfix - 2018-04-09

New Features

  • User Management: Added a new user management system in the Datto Networking Portal

4.28.3 Release - 2018-04-03

Improvements

  • Improved the GeoIP location detection service

Hotfix - 2018-04-02

Bug Fixes

  • Resolved an issue where overriding the transmitting power on some networks resulted in the error "invalid channel/HT Mode/TX power"

Hotfix - 2018-03-29

Bug Fixes

  • Resolved an issue where Google Maps may revert to 0,0 as the longitude/latitude
  • Resolved an issue where Custom Branded emails did not include the name in the From field

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Datto Homepage