Legacy Open Mesh: How Do I Install The Ceiling Enclosure For OM-Series Access Points?

Follow

Question

How do I install the ceiling enclosure for OM-series Access Points?

Environment

  • Datto OM-Series Access Points

Answer

OM-SerThe OM Series ceiling enclosure can be mounted to any drop ceiling rail or solid wall or ceiling and support the OM Series (HS, LC and AN only) access points. The access point is completely hidden inside, with only the lights showing through. It can attach to 9/16" and 15/16" drop ceiling rails, and can also be mounted on any solid wall or ceiling using the enclosed mount.

To install, simply use the correct clips for either 9/16" or 15/16" drop ceiling rails, clip them in at your preferred height, add an access point and clip into place. To mount on a standard ceiling or wall, attach the 15/16" clips to the case and attach the wall/ceiling mount to the wall. Drop in an access point and clip the case into place.

The video below shows the installation process.

 


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Head on over to our Community Forum!