ALERT: Datto Drive Cloud service will no longer be available as of July 1, 2019. For more information, see our end-of-life article. To learn how to download your Datto Drive Cloud data, please visit this article.

Legacy Open Mesh: Installing the OM Series Wall-Plug Enclosure

Follow

Question

How do I install the OM-Series wall plug enclosure?

Environment

  • Open Mesh OM-Series switches

Answer

The OM Series wall plug enclosure supports all types and sizes of North-American outlets, including standard center-screw and Decora-style, without putting any holes into the wall.

The backplate simply screws onto the outlet cover plate, then the top snaps over the backplate with any OM Series access point and 12v US power supply inside. This has the advantage of covering the mounting screw making it non-obvious how the unit is attached.

This enclosure must be installed on the bottom outlet. Replace the middle screw (standard) or bottom screw (decora) during install. It is not designed to cover both outlets.

The video below shows the installation process in detail.


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.