Legacy Open Mesh: Part 4: Configuring Radio, Maintenance, Display and Advanced Settings


Configure > Radio

The Radio settings controls network-wide access point settings. The main items you'll want to set are Channels and Internet Check.



Channels: Auto Channel will let CloudTrax optimize channel settings daily for your network, taking into consideration mesh repeaters, nearby access points, and sources of interference. Auto Channel respects the Maintenance Window setting in Configure > Maintenance to avoid disruptions during critical times. If Auto is selected then the ability to specify channels, on either a per-network or per-access point basis, is disabled.

Manual lets you specify a single channel per band to use for all access points. You can override individual access points in Manage > Access Points. You can also set the channel width for each band.

note: Selecting Channel 165 on the channel list will restrict the channel width to 20 MHz.

Run Optimization Now: When channels are set to auto, channel optimization will run once per day during the maintenance window to determine the best channels to use. This feature allows new installs to make use of the channel optimizer before the maintenance window.

Note: All APs on the network will need to be checking in for channel optimization to be able to run.

Internet Check: When selected, the wireless network will only be available when there is an active Internet connection. This allows access points to recover quickly when they lose a connection and is the recommended setting. When deselected, the wireless network will stay up even when there is no Internet connection. This allows local resources such as printers and shared drives to continue to function, but access points may take longer to recover when they lose a connection.

Configure > Maintenance

Automatic Upgrades: When enabled, your network will automatically upgrade to the latest firmware version as new stable upgrades become available.

Maintenance window: Select the period of time each day when CloudTrax can perform maintenance on your network. This maintenance includes firmware upgrades and Auto Channel scanning and configuration. 

Configure > Display

The Display section allows you to customize the look and feel of CloudTrax, and enable external embeds. 

Display Name: Used to display a more descriptive name on reports. When none is entered, the network name will be used.

Update Logo: Load your own logo to replace the CloudTrax logo in the top left corner of the application.

Allow Read-Only: Click to enable the password-free read-only view of the network status. When enabled, read-only view can be accessed by entering just the network name in CloudTrax without a password. The password will still be required to change any network settings. (No longer available for UM accounts, this is now a user permission.)

Enable 12 Hour Display: Check to display time in 12 hour (am/pm) format.

External embeds: Use the HTML snippet to embed CloudTrax reporting pages on an external site like a client portal.

Configure > Advanced

The Advanced Settings page has a variety of settings that most users won't change. This section will touch on the more common settings.


Root Password: Settings to configure exporting presence data about wireless clients. Commonly used for location analytics. Note that this feature will be part of a paid package of services in the future. 

AP Mesh: When disabled, this turns off meshing on your APs. Mesh Encryption must be enabled.

Mesh Encryption: Encrypts all mesh traffic with WPA2 protection. Access points not belonging to this network won't be able to join the mesh due to the encryption. 

Alternate DNS: Alternate DNS server IP address for your network, such as OpenDNS. OpenDNS provides several additional features such as content filtering that you may find helpful. This setting applies to all SSIDs and can be overridden by setting an Alternate DNS for each individual SSID. 

Custom.sh Server: Enter the URL for the custom.sh script you want to install on all access points in this network. This is a developer option used to install additional features and is not used in normal operation.

Presence Reporting: Settings to configure exporting presence data about wireless clients. Commonly used for location analytics. Note that this feature will be part of a paid package of services in the future. Learn more.

Share Vouchers: When enabled, vouchers created on this network will be usable on all other networks under this account.

Status LED(s): When disabled, this turns off LED lights on your APs.

Bridge wired clients: When a wired client is connected to an access point, it will use settings from this SSID.

Bridge SSID: Select an SSID to bridge to the LAN. This gives clients access to LAN resources such as file servers and printers, disables NAT and lets your LAN assign all client DHCP addresses. You can bridge additional SSIDs by using a VLAN tag on each SSID settings page.

Application Reporting (DPI): Disable this if you want higher Wi-Fi performance (speed). Disabling this will cause application data (pie chart and table) in the clients page to not be displayed and application data in the networks overview page to display all traffic as 'unclassified'.

IGMP Proxy: When enabled multicast traffic will be allowed over the LAN. When disabled multicast traffic will be blocked from entering the LAN.

Delete Network: Select to delete this network from CloudTrax.


Next: Monitoring, Management and Troubleshooting

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage