ALERT: Datto Drive Cloud service is no longer available. For more information, see our end-of-life article. If you'd like to migrate your data to Datto Workplace, see our migration guide.

Legacy Open Mesh: Switches: Switch Templates



This article describes how to configure and apply switch templates for expedited configuration.


  • Open Mesh Switches


Switch Templates are setting templates that can be applied to any switch in your network. This is useful for applying new settings when a switch moves to a new location, or when adding a new switch with specific configuration needed.


Configuring Template Settings

1. Navigate to Manage -> Switches, and select a switch.

If this is your first device and network, follow the steps for adding a network to your account before proceeding.

2. Click on the Manage dropdown, then click Switches, as seen in Figure 1.

Fig_1.PNGFigure 1: Switches

3. Click Manage Templates, as seen in Figure 2.

Fig_2.PNGFigure 2: Manage Templates

4. Input the Template Name, a brief Description of your template, and an attributed switch Model as seen in Figure 3.

Fig_3.pngFigure 3: Template Descriptors

Changing your device model will delete any port settings previously configured in your template.

5. Optionally, you can select a previously added switch to import configuration from, as seen in Figure 4.

Fig_4.pngFigure 4: Import Settings

6. Enable or disable each desired setting for your template. If a setting is neither enabled or disabled, it will remain unchanged when the template is applied. The following settings are available for each template as seen in Figures 5 & 6. Since the setting layout is identical to its original reference within the Switch Settings and Port Settings pages, you can view additional information about the setting by viewing its respective article.

 Switch Settings

Fig_5.pngFigure 5: Switch Settings

Port Settings

The following template example uses the E24v3 model. Select a port to configure it, or select multiple ports to mirror or aggregate them. See the Port Settings article for more information on configurable port settings.

Fig_6.pngFigure 6: Port Settings

6. Click Save Template, as seen in Figure 7.

Fig_7.pngFigure 7: Save Template

Applying a switch template

After configuring a switch template, you can apply a template to any switch. You can either:

  • Click Apply Template in the Switches page as seen in Figure 8.

Fig_8.PNGFigure 8: Apply Template

  • Apply a template setting when adding a new switch.

Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.