Legacy Open Mesh: Access Point Pinhole Reset

Follow

If the AP is running 6.xx firmware and beyond, holding the pinhole button for 15-20 seconds while powered on will clear the access point's local configuration. Once it reconnects with your Datto network, it will re-download the network configuration after re-pair (which you'll be asked to do at next check-in). This can fix certain issues that occur on APs, and is a worthwhile troubleshooting step to take if experiencing trouble on one AP specifically.

mceclip0.pngFigure 1: Reset buttons on Open Mesh access points (click to enlarge)

After the reset has been performed, the AP will need to be re-paired to the network. 

NOTE: If your AP model is the OM5P-AN, the pinhole reset hole in the casing does not have a functioning button. In this case you would need to skip ahead to re-flashing the firmware of the AP as outlined here: How Do I Re-Flash Access Point Firmware Using Windows?


Was this article helpful?

0 out of 1 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage