ALERT: Datto Drive Cloud service is no longer available. For more information, see our end-of-life article. If you'd like to migrate your data to Datto Workplace, see our migration guide.

Legacy Open Mesh: Switches: Spanning Tree Protocols



This article describes Spanning Tree Protocols and how to implement them on a Open Mesh Switch.


  • Open Mesh Switches


Spanning Tree Protocol is a layer 2 protocol that prevents loops in a network that has redundant paths created by multiple switches. It is recommended to utilize this feature if your environment incorporates multiple switches. Open Mesh Switches supports three variations of this protocol.


1. Navigate to Manage -> Switches, and select a switch.

2. Click on Switch Settings.


Figure 1: Switch Settings

3. Click on the Spanning Tree Protocol dropdown to reveal settings, and click the Enable checkbox to interact with them.

Fig2.pngFigure 2: Spanning Tree Protocol

4. Click the dropdown next to Protocol and choose one of the following:

  • Spanning Tree Protocol: This is the standard Spanning Tree Protocol. A root switch with the lowest bridge switch ID (the bridge priority + the switch's MAC address) is elected. Ports are then flagged in five different states: blocking, listening, learning, forwarding, and disabled.
  • Rapid Spanning Tree Protocol: A newer variation of STP that has three states instead of five: discarding, learning, and forwarding.
  • Multiple Spanning Tree: An expansion of RSTP that supports VLAN implementations.

5. Click Save Switch Settings


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.