ALERT: Datto Drive Cloud service will no longer be available as of July 1, 2019. For more information, see our end-of-life article. To learn how to download your Datto Drive Cloud data, please visit this article.

Legacy Open Mesh: What Power Level Is Used When “Use Country Setting” Is Selected?

Follow

Question

What power level is used when the Use Country Setting is selected?

Environment

  • CloudTrax

Answer

When the "Use Country Setting" is selected the power setting would be either the maximum legally allowed power based on the country setting or the maximum power that the device itself can transmit at, whichever is less.

The max power settings for our currently sold access points are as follows: 

Device Band Max Combined Tx Power
A60 2.4 GHz 23.0 dBm
5 GHz 23.0 dBm
A42 2.4 GHz 22.0 dBm
5 GHz 22.0 dBm
A40 2.4 GHz 21.0 dBm
5 GHz 21.0 dBm
OM5P-AC 2.4 GHz 21.0 dBm
5 GHz 21.0 dBm
OM2P-HS v4 2.4 GHz 26.0 dBm
OM2P v4 2.4 GHz 23.0 dBm

 

And the max settings of our older access points are as follows: 

Device Band Max Combined Tx Power
MR1750 2.4 GHz 29.0 dBm
5 GHz 28.0 dBm
MR900 2.4 GHz 29.0 dBm
5 GHz 26.0 dBm
MR600 2.4 GHz 28.0 dBm
5 GHz 25.0 dBm
OM5P-AN 2.4 GHz 18.0 dBm
5 GHz 21.0 dBm
OM5P 5 GHz 23.0 dBm
OM2P-HS 2.4 GHz 23.0 dBm
OM2P-HS v2 & v3 2.4 GHz 26.0 dBm
OM2P 2.4 GHz 26.0 dBm
OM2P v2 & v3 2.4 GHz 23.0 dBm

 


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.