Legacy Open Mesh: Switches: Jumbo Frames

Follow

Topic

This article describes how to enable and configure jumbo frames on an Open Mesh Switch.

Environment

  • Open Mesh Switches

Description

Ethernet frames, as specified by the IEEE 802.3 standard, transmit a Maximum Transmission Unit (MTU) of 1500 bytes. Jumbo Frames support an MTU of up to 9216 bytes.

Ensure all devices connected to the switch can process the Ethernet MTU size set on your switch.

Procedure

1. Navigate to ManageSwitches then select a switch.

2. Click Switch Settings.

mceclip0.pngFigure 1: Switch Settings

3. Click the Jumbo Frames dropdown to reveal settings, and click the Enable checkbox to interact with them.

4. Set an Ethernet MTU size up to 9216 MTUs.

mceclip1.pngFigure 2: Jumbo frame configuration

5. Click Save Switch Settings.


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.