ALERT: Datto Drive Cloud service will no longer be available as of July 1, 2019. For more information, see our end-of-life article. If you'd like to migrate your data to Datto Workplace, see our migration guide.
To learn how to download your Datto Drive Cloud data, please visit this article.

Switches: IGMP Snooping

Follow

Topic

This topic describes how to configure IGMP snooping on Open Mesh Switches.

Environment

  • Open Mesh Switches

Overview

IGMP Snooping is used for controlling multicast traffic by listening to IGMP messages being processed by the switch, and preventing these messages from being sent to hosts not part of the respective multicast.

Procedure

Navigation

1. Navigate to Manage -> Switches, and select a switch.

2. Click on Switch Settings.

Figure 1: Switch Settings (click to enlarge)

3. Scroll down to the IGMP Snooping dropdown to reveal settings, and click the Enable checkbox to interact with them.

Figure 2: Enabling IGMP Snooping (click to enlarge)

Configuration

The available IGMP Snooping versions are v2 and v3. You can select either or in the Version drop down.

You can enable IGMP Snooping for any VLAN by selecting the corresponding checkbox next to the VLAN ID as seen in Figure 3. You can manage your switch's VLANS in the Port Settings page.

Click Save Switch Settings when you have finished modifying settings.


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.