ALERT: Datto Drive Cloud service will no longer be available as of July 1, 2019. For more information, see our end-of-life article. To learn how to download your Datto Drive Cloud data, please visit this article.

Legacy Open Mesh: What channels should repeater APs use?

Follow

A repeater AP must be on the same channel as a gateway AP within wireless range to mesh properly. A repeater should have at least -65 dBm RSSI for best results.  

 

meshing_channels.png

 

While we recommend using the Auto Channel feature to minimize channel overlap between the gateway APs; networks with many repeaters may benefit from manual channel assignment to ensure the repeaters use the best gateway APs.

To manually assign channels per AP, first make sure that the channel setting under
[Configure > Radio] is set to manual. Then under [Manage > Access Points] select the repeater AP and and select the channel in the Radio box. Assign the repeater AP channel to match that of the target gateway AP to ensure the repeater connects to the desired gateway AP.

change_AP_channel.PNG

 

For more information about channel use, see: Which channels should I use?

 

 


Was this article helpful?

0 out of 0 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Community Forum or get live help.