Datto Networking App: WiFi



This article describes the Datto Networking App's WiFi page. 


  • Datto Networking App


The WiFi page lets you configure the SSIDs on access points connected to a Datto network. Tap a network from the list, then tap WIFI to view configurable SSIDs.

mceclip2.pngFigure 1: The WiFi page (click to enlarge)

Viewing SSID settings

Tap an SSID to see its current settings.

mceclip1.pngFigure 2: View SSID settings (click to enlarge)

Configuring SSIDs

Tap the SSID you wish to modify, then tap the pencil icon in the upper right-hand corner of the screen. The following configurable options will appear:

  • SSID Name: Change the name of the SSID
  • Use Access Point Name: Toggle Yes or No to use the name of the access point instead of a separate SSID name
  • Enabled: Enable or disable the SSID
  • Visible: Make the SSID visible to clients
  • Band: Choose between the 2.4 GHz band, 5 GHz band, or both
  • Authentication: Enable or disable authentication on the SSID
  • Authentication type: Choose between WPA Pre-shared key or WPA Enterprise authentication; options will change based on the authentication type selected
  • WPA2-only: Choose WPA2 authentication
  • WPA password: Set the password for WPA authentication 

mceclip4.pngFigure 3: Edit SSID settings (click to enlarge)

Was this article helpful?

0 out of 1 found this helpful

You must sign in before voting on this article.

Want to talk about it? Have a feature request?

Head on over to our Datto Community Forum or the Datto Community Online.

For more Business Management resources, see the Datto RMM Online Help and the Autotask PSA Online Help .

Still have questions? Get live help.

Datto Homepage